As shown in Figure-3, trees and all sorts of vegetation on the site are removed at site clearing phase.Īfter the layout of the structure is set accurately, the excavation work begins and the soil is removed to a required depth in which the foundation of the structure is placed.
If the project site prone to earthquake, then necessary testing and recommendation should be included in the geotechnical report.įig.1: Preparing Site for Construction Projectsįig.2: Borehole Sampling for Geotechnical Report Construction Site Clearing and ExcavationĬlearing and excavation is part of the greater job which is carried out in preparing site for construction projects. These invaluable data adequately define the properties of soil and its behavior in the future. Type of the structure dictates sampling method, type of test, and number of test required.Īfter achieving and interpreting test results, type of foundation appropriate for the site, settlements and related recommendations, liquefaction possibilities, slope stability, groundwater level, soil bearing capacity, excavation related hazards, soil strength, soil classification, and many more information are provided in the geotechnical reports. It is produced based on a series of tests on soil. This report commonly describes soil property and provides necessary recommendation. Therefore, to understand properties and condition of the soil of the project site, a geotechnical report about the soil of the site is a must. Geotechnical report creates communication between project site condition and design and construction recommendation. Geotechnical Report related to Site Soil Properties Construction site clearing and excavation.
Geotechnical report related to site soil properties.Stages or steps which are needed to undertake to prepare the construction project site are. Steps in Preparing Site for Construction Projects To build the structure as per the design, estimate the excavation volume accurately, and provide suitable drainage, structural elevations and layout must be carried out with substantial precision. Site assessment may involve determining the present and installation of underground services, specify suitable foundation depend on recommendation of geotechnical report, anticipate the level of ground water, grading amount needed for proper drainage to push water away from the structure, whether the site is difficult to excavate or not, frost penetration depth. To construct excellent project, the condition of the project site including subsurface and surface condition must be investigated and assessed thoroughly. Compaction of Construction Project Site.Construction Site Clearing and Excavation.Geotechnical Report related to Site Soil Properties.Steps in Preparing Site for Construction Projects.Preparing Site for Construction Projects.
0 kommentar(er)
